HydroCure Wraps

Throat & Neck Wrap

£26.99–£29.99

Includes VAT. Shipping calculated at checkout.

Helps ease throat & neck discomfort

HydroCure Throat & Neck Wrap® is a reusable hydrotherapy wrap based on the traditional Priessnitz Water Cure method.

It combines a cool, damp cotton insert with insulating outer layers, allowing the characteristic cooling → warming → local blood circulatory response of the Priessnitz method to develop.

Depending on the reason for use, the same wrap may also be used for a short cold application or as a dry warming wrap.

When and how to use your wrap
Sore Or Irritated Throat

Traditional cold-to-warm Priessnitz application

Moisten the cotton insert with cold or cool water, wring well and place it inside the wrap.

Apply comfortably around the throat.

Recommended duration: 30–60 minutes

The initial cool sensation should gradually change as the area naturally warms beneath the insulating layers.

Throat Discomfort With A Dry, Irritating Cough

Short cold, wet application

Moisten the insert with cold water, wring well, place inside the HydroCure wrap and apply around the throat.

Recommended duration: 5–10 minutes

Remove the wrap before it has fully warmed.

The application may be repeated later if required and comfortable.

Hoarseness & Voice Strain

When associated with an acute sore or irritated throat:

Use a short cold, wet application for 5–10 minutes.

For lingering hoarseness or voice strain once the acute irritation has settled:

Use a longer cold-to-warm application for approximately 20–30 minutes.

Voice rest and adequate hydration are also important.

Neck Tension & Stiffness

Dry warming application

Use the wrap dry to provide gentle warmth around the neck. You may use it on its own to retain body heat, or with a safely warmed insert or with warmed HydroCure cherry-stone heat pillow specially sized to fit this wrap. Sold separately.Recommended duration: approximately 15–20 minutes, or longer if comfortably warm and well tolerated.

How it works

1. Cooling

The cool, damp insert lowers the temperature of the skin surface. The initial response includes narrowing of superficial blood vessels (vasoconstriction).

2. Warming

The insulating layers reduce heat loss. As the body responds to the cooling stimulus, the treated area gradually warms and superficial blood vessels widen (vasodilation).

3. Local Blood Circulatory Response

The cooling-to-warming cycle produces changes in local skin blood flow. This physiological response forms the basis of the traditional Priessnitz Water Cure method.

Preparation, layers and package contents

1. Moisten

Remove the inner cotton insert and moisten it thoroughly with cold or cool water.

2. Wring

Wring out excess water. The insert should be evenly damp but not dripping.

3. Insert

Place the damp insert back inside the HydroCure Wrap®.

4. Apply

Position the wrap directly against intact skin over the required area and secure it comfortably. The wrap should remain in close contact with the skin without restricting blood circulation.

5. Leave In Place

Use the guide above to select the appropriate application and duration for your symptoms.

Remove the wrap sooner if it causes excessive chilling, pain, numbness, skin irritation or any other unexpected discomfort.

3-Layer System

Inner removable layer

Absorbent cotton insert moistened before application.

Middle insulating layer

Helps prevent moisture passing through the wrap and reduces heat loss.

Outer layer

Soft, comfortable layer designed to hold the wrap securely in position.

Package Contents

• 1 HydroCure Wrap®

• 1 removable cotton insert

Important safety information

Warnings And Precautions

For external use only.

Keep away from fire. This product is not a medical device.

Apply only to intact skin.

Do not use:

• on open wounds or broken, infected or severely irritated skin

• where normal skin sensation is significantly reduced

• if the wrap causes persistent pain, excessive chilling, numbness or irritation

Do not fasten the wrap so tightly that blood circulation is restricted.

Children and people who are frail, have impaired sensation, impaired blood circulation or are unable to communicate discomfort should use the wrap only under appropriate supervision.

If you are uncertain whether Priessnitz application is appropriate for you because of an existing medical condition, seek advice from an appropriate healthcare professional before use.

This product is intended for supportive use and should not delay appropriate medical assessment or treatment. Seek medical advice for severe, unexplained, persistent or worsening symptoms.

Normal Response During A Wet Priessnitz Application

An initial sensation of coolness is expected when the damp insert is first applied.

During a longer cold-to-warm application, the area should gradually feel less cold and become comfortably warmer as body heat accumulates beneath the insulating layers.

Temporary mild redness of the skin may occur after removal as local skin blood flow changes.

A short cold application is deliberately removed earlier, before the full warming response develops.

Stop using the wrap if you experience significant pain, prolonged numbness, marked skin irritation or any unexpected reaction.

Care, storage and materials

• Remove the cotton insert before washing where applicable.

• Machine wash at 40°C.

• Air dry.

• Do not tumble dry.

• Do not bleach unless permitted by the product care label.

• Ensure all components are completely dry before storage.

Always follow the care label supplied with the individual product.

Storage And Reuse

HydroCure Wraps® are designed for repeated use.

After each use, allow the wrap and insert to dry completely.

Store clean and dry, away from excessive heat and direct sunlight.

Inspect the wrap before reuse. Do not continue to use it if the fabric, fastening or insulating layer is significantly damaged or no longer functions as intended.

For hygiene reasons, the wrap should be for individual use.

Composition Of The Wrap

Outer layer: 100% cotton

Core: 50% polyester, 25% cotton, 25% polyurethane

Inner removable layer: 100% cotton

Fastening: Velcro

Composition may vary between individual HydroCure Wrap® models. Refer to the product label where applicable.

Features

✓ Drug-Free

✓ No Power Required

✓ Reusable

✓ 100% Cotton contact layers

Manufactured by Mamavis. Distributed in the UK by HydroCure Wraps Ltd.

Instructions for use

Read the instructions for use (PDF)

Check the size guide

Read the use guide